Envision Xenics Gobi-384-25mm User Manual Download Page 3

Page: 3 / 28

User Manual

Gobi-640-17µm and Gobi-384-25µm-GigE, CL, CXP Camera

Revision History

Issue

Issue date

Changes

Modified by

001

21/03/2012

First issue

CDU

001.01

04/04/2012

Table 2.1 updated

CDU

001.02

18/04/2012

Additional review

CDU

001.03

30/10/2012

New sections added and other sections updated according to
input and review

CDU

001.04

31/10/2012

Figs updated: are without IO expander

CDU

001.05

29/11/2012

Camera feature and functions updated

JDS

001.06

30/11/2012

Power cable diagram added

CDU

001.07

11/02/2013

Link to table corrected

CDU

001.08

11/02/2013
22/02/2013

New AutoGain algorithm
Gobi-640-CL info added
Camera functionality for GigE and CL moved to separate ICD.

JDS

Title chap. 2.2 added, chap. 1.2, 6.4 and chap. 7 small updates,
table 2.1: weight added GigE camera

CDU

001.09

19/04/2013

Chap. 1.2, 1.3, 4.2, 5.1, 6.3, 7 updated

CDU

001.10

05/06/2013

Firmware update Gobi-640-GigE (version 2013/05/31) & Gobi-
640-CL (version 2.1.1043)
New mechanical drawings

JDS

001.11

25/09/2013

New revisions of mechanical drawings in Appendix B, new
revision of Appendix D: Bolometer Control & Operation

CDU

001.12

02/10/2013

Gobi-384 added / new revision of Appendix D: Bolometer
Control & Operation

JDS

09/10/2013

Appendix D: Bolometer Control & Operation: new revision
added, info about Gobi-384-25µm added

CDU

001.13

13/11/2013

Review manual

JDS

002

25/11/2013

New issue Appendix Bolometer Control & Operation, CL
interface: note about timing diagram added, Appendix F: frame
rate calculator added,
Second released issue

CDU

002.01

06/01/2014

Trigger warning added

CDU

002.02

19/01/2014

Updated mechanical drawing (rev D)

JDH

002.03

20/01/2014

Updated Ref 7 Xeneth Installation Manual

CDU

002.04

31/01/2014

Trigger-in delay and trigger-in jitter added

CDU

002.05

26/02/2014

New issue Appendix F: Frame rate calculator

CDU

002.06

28/03/2014

Gobi-640-CXP added

JDS

002.07

31/03/2014

Appendix mechanical drawing updated (EASM file removed)

CDU

002.08

25/04/2014

Table 1.1 updated

JDS

002.09

02/05/2014

Onboard algorithms updated
XEN-numbers updated
Lens table updated

JDS

002.10

13/05/2014

New revision of Appendix Bolometer Control & Operation

CDU

003

13/06/2014

release

JDS

www.envision.co.kr

•Supporting your Vision

(주)앤비젼

서울시 금천구 가산동 550-1 IT캐슬 1동 603호 (153-768)

Tel.

02. 2624. 5503

Fax.

02. 2082. 6427

e-mail.

[email protected]

Summary of Contents for Xenics Gobi-384-25mm





























Search results

Summary of Contents for Xenics Gobi-384-25mm

Reviews:

Related manuals for Xenics Gobi-384-25mm

Brands by name

Popular brands

Envision Xenics Gobi-384-25mm, User Manual

Search results

Summary of Contents for Xenics Gobi-384-25mm

Reviews:

Related manuals for Xenics Gobi-384-25mm

Brands by name

Popular brands