Menu Illustration
•
Press the MENU-button to activate the OSD window.
•
Press or to navigate through the functions. Once the desired function is highlighted, press the
MENU-button to activate it. If the function selected has a sub-menu, press or again to navigate
through the sub-menu functions. Once the desired function is highlighted, press MENU-button
to activate it.
•
Press or to change the settings of the selected function. To exit and save, select the exit
function. If you want to adjust any other function, repeat steps 2-3.
•
OSD Lock Function: To lock the OSD, press and hold the Menu button while the monitor is off
and then press power button to turn the monitor on. To un-lock the OSD - press and hold the
Menu button while the monitor is off and then press power button to turn the monitor on.
Hotkey Illustration
•
Eco Mode and DCR hot key: Press the Eco key continuously to select the Eco mode of
brightness and DCR on when there is no OSD (Eco mode hot key may not be available in all
models).
•
4:3 or wide image ratio hot key: When there is no OSD, press + continuously to change 4:3 or
wide image ratio. (If the product screen size is 4:3 or input signal resolution is wide format, the
hot key is disabling to adjust.)
•
Source hot key : When the OSD is closed, press Auto/Source button will be Source hot key
function (Only for the models with dual or more inputs) .Press Source button continuously to
select the input source showed in the message bar, press Menu/Enter button to change to the
source selected.
•
Auto configure hot key: When the OSD is closed, press Auto button will be auto configure hot
key function.
9
＞
＜
＞ ＜
＞ ＜
