106
Appendix | Bellwin
Message format Explanation 1:
depid=xxxxxx&username=@@ACCOUNT@@&password=@@PASSWO
RD@@&dstaddr=@@GSMNUM@@&smbody=
@@IP@@,@@MSG@@
If you fill the above info into the Message Format, the system would
automatically bring-in the followings info:
Message format
Note
Company code (dSHid=xxxxxx) &
Required
User's Account
(account=@@ACCOUNT@@)&
Required
User's password
(password=@@PASSWORD@@)&
Required
Cellphone number
(dstaddr=@@GSMNUM@@)&
Required
Device IP & Message content
(smbody=
@@IP@@,@@MSG@@
)
This format is
changeable with the
content.
The message will automatically change as the even change.
Remove @@IP@@, means device IP info will not reveal in message
content.
Use SMS Test to check the system after setup,