18
Pump Maintenance
Filter Assembly
Filter Gasket
The pump product nipple and the pump
electrical contacts should be kept
clean.
Pump Contacts
Product
Discharge
Nipple
The pump inlet screen and inlet holes should be checked and cleaned during inspection.
After the filter is cleaned, clean pump contacts with
brush. Make sure that the contacts are free
of any
corrosion. If the pump will be reinstalled in the
probe for immediate use, proceed to the Pump
Flooding procedure on page 8. If the Spill Buddy
will be stored for any period of time, lubricate the
pump as described on page 13 and then seal it in a
plastic bag to be kept with the system. The Pump
Flooding procedure must then be performed before
the pump is reinstalled in the Probe.
Envirotecnics
Tel: +34 872 080 542
envirotecnics@envirote
cnics.com
www.envirotecnics.com
