Environmental Express IAQ 15 Connect Operating Instructions Manual Download Page 4

4 | 

environmentalexpress.com

 

 

 

Out of Warranty Repair 

If the IAQ 15 Connect fails after the warranty period has lapsed, the repair procedure is as follows: 

First, notify an Environmental Express Technical Service Representative of the product’s failure and place an 

order for repair. Whenever possible, our customer service technician will walk you through possible 

troubleshooting scenarios which may enable you to repair your unit on-site. 

After any repairs are performed, 

contact Environmental Express on how to verify a safe operation. 

If on-site repair is not possible, the customer may return the non-working unit to Environmental Express using 

appropriate shipping containers and insurance. Repair charges will be assessed and estimated prior to work 

being done. Repair charges will include all freight costs as well as reasonable and customary charges for parts 

and labor. 

NOTE:

  

This warranty does not apply to any consumable items associated with the IAQ 15 Connect. 

 

Section 2 -

 

Declaration of Conformity 

 

This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this 

device may not cause harmful interference, and (2) this device must accept any interference received, including 

interference that may cause undesired operation.  

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and 

Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: 1. 

This device may not cause interference. 2. This device must accept any interference, including interference that 

may cause undesired operation of the device.  

L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, 

Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. 

L’exploitation est autorisée aux deux conditions suivantes : 1. L’appareil ne doit pas produire de brouillage; 2. 

L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en 

compromettre le fonctionnement.  

 

Changes or modifications not expressly approved by Environmental Express could void the user's authority to 

operate the equipment. 

 

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 

15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a 

residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not 

installed and used in accordance with the instructions, may cause harmful interference to radio 

communications. However, there is no guarantee that interference will not occur in a particular installation. If 

this equipment does cause harmful interference to radio or television reception, which can be determined by 

turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of 

the following measures: 

 

Reorient or relocate the receiving antenna. 

Summary of Contents for IAQ 15 Connect














Reviews: