07-02331B EB80
3
EnviroBoss.
Error messages
If the EB80 onboard diagnostics discover a problem, the
unit will display an error message. See “Error Messages”
for an explanation of each message.
Control Panel Guide
ON/OFF
.
Press to turn the unit on or off. When the ma-
chine is turned on, the display normally reads PLEASE
WAIT COMP. DELAY and performs a numeral count-
down for a maximum of 60 seconds to 0. This delay al-
lows time for refrigerant pressures to equalize for easier
starting. Once the unit completes the compressor delay,
the display shows UNIT ON XX HRS and cycles be-
tween INLET XX°F and INLET XX%. NOTE: If no com-
pressor delay countdown is displayed, a delay is not
necessary and the machine will begin operation immedi-
ately.
DISPLAY MENU.
Press to cycle through the display of
additional dehumidifier conditions and User Settings. To
return to the main menu, press the ON/OFF key once.
MENU SELECTION.
Press to change the values of the
"User Defined" settings. The MENU SELECTION key
acts as the UP key for adjusting the setpoint for Humidi-
stat mode operation. See User Settings Menu.
PURGE.
Press to empty water from the condensate
pump reservoir. The display will read PUMP PURGING
with a numeral countdown.
NOTE: During normal operation, the pump purges auto-
matically.
ON/OFF
Press and release to turn unit
on
or off.
DISPLAY MENU
Press to select next item in
menu. Menu item will show
in display.
MENU SELECTION /
UP KEY
Press to toggle or select val-
ues in menu displayed.
PURGE PUMP
Press and release to start
purge. Display will count
down seconds remaining until
purge is complete.
CONTROL PANEL
ON/OFF
DISPLAY
DISPLAY
MENU
MENU SE-
LECTION /
UP KEY
PURGE PUMP
