DISASSEMBLY
r
Emoval
of
c
ast
s
idEs
and
d
oor
:
To remove the cast sides, lift off the Cast Top and then
unscrew the slider knob and then remove the two top bolts
using a 3/8” socket. The Cast Side may then be lifted up.
The door may be taken off by first lifting off the Cast Top
and then removing the two bolts from the top door hinge,
using a 3/8” socket.
d
oor
l
atcH
a
djustmEnt
:
Over time as the door gasket fully compresses to the face of the firebox, it may be necessary
to adjust the door latch position to maintain a tight seal. Signs that the door latch may need
adjusting are if the door handle feels overly loose when closed, or if you notice air leaks
occurring during low burns.
1. Remove the right Cast Side (shown above)
2. Use a 3/8” socket to loosen the two 1/4” bolts and slide the latch slightly back. Retighten
the bolts and latch the handle. The handle should provide a bit of resistance and close firmly.
33