Chapter 1
Introduction & Safety
1-2
1.3.1. Customer
The term “customers” refers to users who redeem containers in exchange for payment. Their level of
interaction with the
RVM
is confined to inserting containers into the machine, viewing instructions and
advertisements on the video screen, pressing the payment button, and removing the voucher from the
receipt chute. Customers must not place their hands into the In-Feed or have access to the inside of the
ULTRA
.
1.3.2. Sponsor
The “sponsor” refers to the owner or lessee of the
ULTRA
. In
US
states with bottle deposit laws, the
ULTRA
’s sponsor is usually a retailer that sells beverages that have container deposits. The sponsor is
responsible for maintaining a list of redeemable containers (the “bar code table”), notifying Envipco of
updates to the bar code table, and requesting custom messages appearing on the
LCD
and printed
vouchers.
1.3.3. Machine Attendants
“Machine attendant” refers to anyone that does one or more of the following tasks:
•
cleans the outside of the machine
•
replaces the printer paper
•
maintains the supply of printer paper and commodity bags
•
empties the commodity bins
•
initiates service calls
Machine attendants need the top door key to change the printer paper and the bottom door key to
empty the commodity bins.
1.3.4. Service Technician
A service technician is trained by Envipco to maintain and repair the
ULTRA
. No other person shall
repair or perform internal maintenance on the
ULTRA
.
Warning!
The sponsor, along with the machine attendants and service techni-
cians, are responsible for ensuring that both cabinet doors are locked
and secure while customers have access to the machines.
Warning!
Envipco is not responsible for damages or injuries incurred when unau-
thorized repairs are performed on the
ULTRA
.
Summary of Contents for U48DFF
