Enttec PHERO 30 White, Manual

Page: 1 / 6

Phero 30 W Manual
50878
For latest version visit:
www.enttec.com
1
ID: 568660
Back Panel
Box Contents

ENTTEC PHERO 30 White (73905 or 79006)

Mounting brackets

This user manual
Features

30 independently controllable WHITEx3 Pixels

2700K, 4000K and 6500K High CRI leds

Can produce any combination of the 3 white
colour temperatures per pixel

Flexible, light and slick design

In-built Power Supply

Compatible with Pixelator family and Pixie driver
 Plink data bus allows to daisy-chain up to 11 units

Standard Cat6 wiring allows up to 300m distances

Mains power through Powercon connectors for
convenient installation

50,000+ hours expected LED life
 Up to 90 DMX channels through Pixelator

Over voltage input protection
Safety

Mains voltages inside, please never intend to open it
when mains connected

Do not expose the ENTTEC Phero to rain or moisture,
doing this will void the warranty

Do not remove the cover, there are no serviceable
parts inside

This unit is intended for indoor use only

Ensure proper earth connections
Basic Setup

Connect the ENTTEC Phero to a Plink enabled device
such as ENTTEC Pixelator using a cat5/6 cable
 Power up the unit using the blue powercon
connector. The power LED should light up

Feed some data through your Plink enabled device