OCTO MK2 (71521)
Visit the ENTTEC website for the latest version.
..
USER MANUAL
5
|
ID: 5928937
Document Updated: October 2022
Wiring Diagrams
Locate the OCTO MK2 and PSU as close as possible to the first pixel in your chain to reduce the impact
of voltage drop.
To reduce the likelihood of voltage or Electro Magnetic Interference (EMI) being induced on the control
signal lines, where possible, run control cabling away from mains electricity or devices that produce high
EMI, (i.e., air conditioning units). ENTTEC recommends a maximum data cable distance of 3 meters. The
lower the cable distance, the lower the impact of voltage drop.
To ensure a reliable connection, ENTTEC recommends the use of cable ferrules for all stranded cables
connected to the OCTO MK2’s screw terminals.
