Entrust Sigma DS4, User Manual

Page: 14 / 30

6 About the Rear Indent Module (RIM)
Electrical Requirements
The power supply detects the input voltage and works within the range stated.
About the Rear Indent Module
Use the following information to become familiar with the RIM.
Back and Left Side
Electrical Requirements
Input Output
100–240V/50–60 Hz/1.6Amp 24V/3.0Amp/72W

The RIM power supply is separate from the printer power supply.

Refer to your printer’s Installation and Administrator’s Guide for printer electrical
requirements.
RIM Status Light The light shows the status of the RIM. Refer to “RIM Status
Light” on page 7 .
Rear Exit The rear exit allows a card to be moved out of the rear
indent module, for example to clear a card jam.
Note: The card also moves a short distance out the rear exit
while indenting.
Power Connection The power connection provides a plug-in connector for the
RIM power supply.
Rear Exit
RIM Status Light
Power Connection