Entrust Artista CR875, Installation And Administrator'S Manual

Page: 126 / 150

116 Supplies and Parts
Card Storage
These guidelines apply to both blank card stock and processed cards.

Use cards that are at room temperature. If cards are stored in a cooler environment than the
printer, allow them to reach room temperature before using them.

Stack cards so that they will not shift and rub against each other.

Make sure that the magnetic stripe on one card does not come in contact with the magnetic
stripe on another card.

Make sure that cards with magnetic stripes are stored away from magnetic objects.

Store cards in a cool, dry, and dark place. Excessive light can cause yellowing of cards on
exposed edges.

Store cards in their original packaging.
Cleaning Supplies
For best results, keep additional cleaning supplies available.
The following cleaning supplies are available:
Supply Part No. Description
Isopropanol cleaning
cards
552141-002 Pack of 10 double-sided, isopropanol cleaning
cards used to clean the printer card track and
transport rollers.
Adhesive cleaning cards 524405-001 Pack of 10 adhesive cleaning cards used to
clean the printer card track, transport rollers,
and printhead cam rollers,.
Cleaning sleeves 569946-001 Pack of 5 adhesive cleaning sleeves.
Cleaning swabs 507377-001 Pack of 5 cleaning swabs for cleaning debris
and dust from the printhead and from hard-
to-reach internal areas of the printer.
Lapping sticks 510108-001 Used to clean the printhead.
Lapping stick support 529147-001 Support tool used to guide the lapping stick
and cleaning swab when cleaning the
printhead.
Card inspection gloves 812335-001 Nylon gloves for card handling, 12 pairs/pack.