ENTRON PROGRAMMING TOOLS
NetFlash™
84 |
P a g e
Copyright © 2021 BF ENTRON and/or its affiliates. All rights reserved
Product Model:
iPAK2v2
Firmware Version:
V2.10
May 22 | Doc No 700253-2
Icon
Name
Description
Example
Connect
with Control
Information about the target control is extracted and
displayed.
After clicking the icon information extracted from
the control will be displayed in the Flash Window.
Select Flash
File
The icon opens the Windows File Explorer to search the PC
for the selected firmware.
Once the firmware has been selected, Click Open.
The filename will now appear at the top of the Flash
Window.
Start
Transfer to
Control
Click on this tool to begin the firmware transfer to the
control.
You will be prompted to choose which memory is to
be updated.
Click on the button for the required memory and
the transfer will begin. Note that NetFlash cross-
checks that the selected file is suitable for the
chosen destination.
Change
Active
Memory
This tool allows users to:
1)
Activate newly installed firmware
2)
Switch to the firmware in the alternate memory
You will be prompted to choose which memory to
make active:
Click on the button for the required memory. The
control will then need to be restarted in order for
the change to take effect.
Table 20: NetFlash Flash Window Icons
