Entrematic EM SW EMO, Installation And Service Manua, Page: 18 / 74

7.1 Arm system, PUSH
Art.No. 1003576BK
PUSH
This arm system is delivered with drive arm, telescopic part and door
fitting.
It is used if the operator is installed on the wall on the opposite side of
the door swing and approved for fire door applications.
7.1.1 PUSH-arm extensions
345 mm extension
Art. No. 173005
Extension Reveal = A
None (standard arm) 0-100 mm
345 mm 100-210 mm
230 mm + Joint part 210-300 mm
230 mm extension
Art. No. 173004
A
Joint part
Art. No. 173191
7.2 Arm system, PULL
Art. No. 1003577BK
PULL
This arm system is delivered with drive arm, guide shoe and door fitting.
It is used if the operator is installed on the wall on the same side as the
door swing.
7.3 Arm system, PULL-P
Art. No. 1005273BK
This arm system is delivered with drive arm, guide shoe and door fitting
with break-out unit.
It is used if the operator is installed on the wall on the same side as the
door swing and break-out unit is required.
1005088-EMEI-11.0 Issue 2014-11-24 18
7 Part identification & Accessories