26
IP2159EN - 2017-06-12
Apertura a sinistra
Apertura a destra
A
A
B
B
C
B
B
180°
10.3 Fixing the door stop
In the case of installations with a sliding arm, proceed as follows:
• Remove the limit switches [B]. Loosen the door stop [A] and move it to the unknurled part of the drive arm.
• Rotate the limit switches by 180°. Reposition them on the gearmotor as shown in the figure.
• Reposition the door stop [A] as shown in the figure.
• Move the door manually to check it opens and closes correctly, without any friction.
• Adjust the internal open door stop [F], as indicated in paragraph 10.3.
The door stop [A] must be fitted as close to the closure limit switch [B] as possible.
i
The following operations must be carried out with the arm installed and the door closed.
A
B
B
C
B
B
180°
i
Left-hand opening
Right-hand opening
