23
KT-400 Ethernet Four-Door Controller Installation Manual
Important Installation Rules about Expansion Modules
Note 1:
The maximum current draw
must be calculate each time
there is a new module added to the SPI chain.
Rule 2:
The SPI cable, between the KT-400 and the 1st module or between each modules, cannot exceed 1 m (3 ft). Shielded
wire should only be used in areas with excessive RF noise of electromagnetic interference. Keep in mind that the
expansion modules must be defined in the EntraPass system when they are installed.
Rule 3:
There is already 4 relays available on the KT-400 Ethernet Four-Door Controller. Don't forget to check the relays
number assignments to prevent redundancy unless it has been planned on purpose.
For more details concerning the expansion modules, refer to the following documents:
Part Number
Description
DN1775
KT-MOD-INP16 Install Sheet - French version
DN1776
KT-MOD-INP16 Install Sheet - English version
DN1780
KT-MOD-OUT16 Install Sheet - French version
DN1781
KT-MOD-OUT16 Install Sheet - English version
DN1785
KT-MOD-REL8 Install Sheet - French version
DN1786
KT-MOD-REL8 Install Sheet - English version
DN1805
KT-MOD-CAB Install Sheet - French version
DN1806
KT-MOD-CAB Install Sheet - English version
DN1833
KT-MOD-CABEU Install Sheet - French version
DN1834
KT-MOD-CABEU Install Sheet - English version
DN1790
KT-MOD-INP16, -OUT16 and -REL8 Expansion Modules Dimensions Drawing
DN1792
KT-MOD-CAB Dimensions Drawing
DN1794
KT-MOD-CABEU Dimensions Drawing
DN1795
KT-MP200 Mounting Plate for KT-MOD-INP16, -OUT16 and -REL8 Expansion Modules
Dimensions Drawing
wwww.EntraPASS.com / 8641 S. Warhawk Rd., Conifer, CO 80433 - Tel: 303-670-1099 - Email: [email protected]
wwww.EntraPASS.com
8641 S. Warhawk Rd., Conifer, CO 80433 - Tel: 303-670-1099 - Email: [email protected]
