52
4 Maintenance
Keep your product away from water and humidity. Before carrying out maintenance tasks on your
product, disconnect your product from power sources and clean it with a dry cloth only. Keep your
product away from water, chemical solvents etc.
It is recommended to have cable connections checked by an authorized technical personnel annually.
There is no user serviceable or repairable parts.
Please contact the dealer for all service processes.
5 Warranty Terms
Your product has 2 (two) years of warranty against manufacturing defects.
Please contact the dealer for all service processes.
The manufacturer cannot be held responsible for unwanted situations that may emerge due to failure
to follow the instructions in this manual.
In case of a malfunction, the product should be repaired by the manufacturing company only.
Otherwise, the warranty will be void.
Never dismantle the product. If you do so, the warranty will be void.
6 Conformity Data
EN 50470-1: Electricity measuring equipment (a.a.) - Section 1: General rules, tests and testing
conditions - Measuring equipment (class a, b and c)
EN 60068-2-1 Testing for resistance to environmental conditions - section 2-1: Tests - Test a: Cold
EN 60068-2-2 Basic environmental conditions Section 2: Tests - Test B: Dry heat
TS EN 60068-2-6 Environment test - Section 2-6: Tests - Fc tests: Vibration (sinusoidal)
EN 60068-2-30 Testing for resistance to environmental conditions - section 2-30: Tests - Test db:
Damp heat, cyclic (12 hours + 12 hours cycles)
TS EN 60529: Protection degrees ensured with cases (IP code) (on electrical equipment)
EN 60255-1: Measuring relays and protection equipment Section 1: General specifications
EN 61000-3-2: Electromagnetic compatibility (EMC) - Section 3-2: Limit values - Limit values for
harmonic current transmissions (equipment input current is 16A per phase).
EN 61000-3-3 Electromagnetic compatibility (EMC)-Section 3-3: Limit values-Voltage Changes,
Fluctuations and Flickering Limits on Low Voltage Supply Systems for Devices Whose Rated Current
is 16 A per Phase (Included) and which are not Subject to Conditional Connection
EN 61000-4-2: Testing and measuring techniques, Electrostatic discharge immunity test.
EN 61000-4-3 Testing and measuring techniques-Radiant, radio frequency, electromagnetic field,
immunity test
EN 61000-4-4 Immunity tests for electrical fast transient / sudden impact.
EN 61000-4-6 Immunity to transmitted distortions induced by RF fields
EN 61000-4-8 Immunity test for magnetic fields with mains frequency.
EN 61000-4-11 Immunity tests for voltage dips, short interruptions and voltage changes EN 55022
Information technology devices - Radio disturbance specifications - Measuring methods and limits
TS EN 61010-1 Measuring, checking and safety rules for electrical equipment used in the laboratory -
Section 1: General rules
EN 61010-1 Measuring, checking and safety rules for electrical equipment used in the laboratory -
Section 1: General rules
4 Maintenance
5 Warranty Terms
6 Conformity Data