Enterasys SecureStack C2, Configuration Manual, Page: 561 / 607

show multiauth idle-timeout
SecureStack C2 Configuration Guide 18-37
Parameters
Defaults
If no options are specified, multiple authentication session entries will be displayed for all
sessions, authentication types, MAC addresses, and ports.
Mode
Switch command, read ‐ only.
Example
This example shows how to display multiple authentication session information for port
ge
.1.1.
C2(su)->show multiauth session port ge.1.1
__________________________________________
Port | ge.1.1 Station address | 00-01-03-86-0A-87
Auth status | success Last attempt | FRI MAY 18 11:16:36 2007
Agent type | dot1x Session applied | true
Server type | radius VLAN-Tunnel-Attr | none
Policy index | 0 Policy name | Administrator
Session timeout | 0 Session duration | 0,00:00:25
Idle timeout | 5 Idle time | 0,00:00:00
Termination time | Not Terminated
show multiauth idle-timeout
Use this command to display the timeout value, in seconds, for an idle session for all
authentication methods.
Syntax
show multiauth idle-timeout
Parameters
None.
Defaults
None.
Mode
Switch command, read ‐ only.
all (Optional) Displays information about all sessions, including those with
terminated status.
agent dot1x | mac |
pwa
(Optional) Displays 802.1X, or MAC, or port web authentication session
information.
mac address (Optional) Displays multiple authentication session entries for specific
MAC address(es).
port port ‐ string (Optional) Displays multiple authentication session entries for the
specified port or ports.