Enterasys SecureStack C2, Configuration Manual, Page: 416 / 607

set rmon capture
13-20 RMON Configuration
Parameters
Defaults
If no options are specified, all buffer control entries and associated captured packets will be
displayed.
Mode
Switch command, read ‐ only.
Example
This example shows how to display RMON capture entries and associated buffer entries:
C2(rw)->show rmon capture
Buf.control= 28062 Channel= 38283 EntryStatus= valid
----------------------------------------------------------
FullStatus avail FullAction lock
Captured packets 251 Capture slice 1518
Download size 100 Download offset 0
Max Octet Requested 50000 Max Octet Granted 50000
Start time 1 days 0 hours 51 minutes 15 seconds
Owner monitor
captureEntry= 1 Buff.control= 28062
--------------------------------------------
Pkt ID 9 Pkt time 1 days 0 hours 51 minutes 15 seconds
Pkt Length 93 Pkt status 0
Data:
00 00 5e 00 01 01 00 01 f4 00 7d ce 08 00 45 00
00 4b b4 b9 00 00 40 11 32 5c 0a 15 43 05 86 8d
bf e5 00 a1 0e 2b 00 37 cf ca 30 2d 02 01 00 04
06 70 75 62 6c 69 63 a2 20 02 02 0c 92 02 01 00
02 01 00 30 14 30 12 06 0d 2b 06 01 02 01 10 07
01 01 0b 81 fd 1c 02 01 01 00 11 0b 00
set rmon capture
Use this command to configure an RMON capture entry.
Syntax
set rmon capture index { channel [ action { lock }] [ slice slice ] [ loadsize loadsize ]
[ offset offset ] [ asksize asksize ] [ owner owner ]}
Parameters
index (Optional) Displays the specified buffer control entry and all captured
packets associated with that entry.
nodata (Optional) Displays only the buffer control entry specified by index.
index Specifies a buffer control entry.
channel Specifies the channel to which this capture entry will be applied.