Enterasys SecureStack C2, Configuration Manual, Page: 124 / 607

show lldp port local-info
4-18 Discovery Protocol Configuration
Parameters
Defaults
If port ‐ string is not specified, port location configuration information will be displayed for all
ports.
Mode
Switch command, read ‐ only.
Example
This example shows how to display port location information for three ports.
C2(ro)->show lldp port location-info ge.1.1-3
Ports Type Location
-------- ------------- -------------------------
ge.1.1 ELIN 1234567890
ge.1.2 ELIN 1234567890
ge.1.3 ELIN 1234567890
show lldp port local-info
Use this command to display the local system information stored for one or more ports. You can
use this information to detect misconfigurations or incompatibilities between the local port and
the attached endpoint device (remote port).
Syntax
show lldp port local-info [ port-string ]
Parameters
Defaults
If port ‐ string is not specified, local system information will be displayed for all ports.
Mode
Switch command, read ‐ only.
port ‐ string (Optional) Displays port location information for one or a range of
ports.
port ‐ string (Optional) Displays local system information for one or a range of
ports.