Enterasys RoamAbout RBTBG-AW, Installations And Specifications

Page: 39 / 48

Modifying a Wireless Network
802.11a/b/g PC Card Installation and Specifications 2-19
Security
This section describes the settings included on the Security tab.
After accessing the Configuration Setting dialog box, click the Security tab and edit these settings
as follows:
WPA
Enables the use of WiFi protected Access (WPA). This option requires IT administration.
To select WPA, follow these steps:
1. Click the WPA radio button.
2. Click the arrow in the WPA EAP Type menu list and select one of the following options:
EAP ‐ TLS, EAP ‐ TTLS, or PEAP (EAP ‐ MSCAHP ‐ V2).
3. Click Configure and complete the appropriate configuration information.
Note: Check with your Network Administrator for the security features supported
by your wireless network.