Enterasys AP2650, Installation Manual, Page: 43 / 58

Optional Third-party External Antennas
Enterasys Wireless Outdoor AP Installation Guide 4-3
Note: Third-party antennas must be professionally installed. The following are requirements for
professional installation:
Equipment Marketing:
• The device can not be sold retail to the general public or by mail order. It must be sold to dealers.
Professional Installation:
• Installation must be controlled.
• Installed by licensed professionals (Equipment sold to dealers who hire installers).
• Installation requires special training (special programming) and antenna and cable installations.
Application:
• The intended use is generally not for the general public. Instead, it is generally for industry/
commercial use.
Table 4-7 Permitted Antennas
Characteristics
Antenna # and
Type Frequency/
GHz Antenna
gain/dBi
Impedence/W
Order No. (ordered from
Siemens A&D)
Omni Antenna # 1
ANT795-6MN
2,4 6
50 6GK5795-6MN00-0AA6
5 8
Omni Antenna # 2
ANT792-6MN
2,4 6 50 6GK5792-6MN00-0AA6
Omni Antenna # 3
ANT793-6MN
5 5 50 6GK5793-6MN00-0AA6
Patch Antenna # 4
ANT795-6DN
2,4 9
50 6GK5795-6DN00-0AA6
5 9
Directional antenna Antenna # 5
ANT792-8DN
2,4 14 50 6GK5792-8DN00-0AA6
Directional antenna Antenna # 6
ANT793-8DN
5 18 50 6GK5793-8DN00-0AA6
Helix Antenna # 7
ANT792-4DN
2.4 4 50 6GK5792-4DN00-0AA6
Omni Antenna # 8
ANT793-4MN
5 5 50 6GK5793-4MN00-0AA6
Note: The antenna feedline of one metre used in testing are the minimum cable length. Longer
cable may be used with losses greater than or equal to the cables used for testing. The maximum
power settings must be adjusted according to “
Antenna Channel Power Settings ” on page 4-4.
Note: If one of the following antenna is used, you must select an operating channel (on the
Advanced 802.11b/g and Advanced 802.11a tabs) and the corresponding allowed max power
from the values listed in table Antenna channel-power information. Do not select a higher power
than the value listed in “
Antenna Channel Power Settings ” on page 4-4.