© 2019 Enphase Energy Inc.
14
5. Mount the AC Battery on the Wall
WARNING:
Risk of injury and equipment damage. You must mount the AC Battery on a
suitable wall.
WARNING
: Risk of injury and equipment damage. Avoid dropping the AC Battery. Doing so
may create a hazard, cause serious injury, and/or damage the equipment.
WARNING
: Before mounting the Enphase AC Battery, ensure that the junction box cover is
secured!
WARNING
: Take care when lifting the AC Battery. The AC Battery is heavy and may require
two persons to lift.
a.
Using both hands, lift the AC Battery from the packaging and place it right side up on a flat surface.
Be sure that the AC connector is not pinched underneath.
b.
Begin by installing the AC Battery located
closest to the main supply.
Using the two grip insets on the side
of the AC Battery, lift and carry the
AC Battery to the installed wall-mount
bracket.
c.
While fitting the AC Battery onto the wall-
mount bracket, ensure that the four tabs
on the AC Battery are inserted into their
corresponding openings in the wall-mount
bracket.
After the tabs are inserted, begin lowering
the AC Battery slowly to ensure that the
tabs have latched onto the wall-mount
bracket.
WARNING:
Risk of injury and equipment damage. Do not release the AC Battery until you
ensure that all four tabs have safely latched onto the wall-mount bracket.
WARNING:
Risk of equipment damage. When placing the AC Battery on the wall-mount
bracket, ensure that the junction box does not pinch the DC connector, the AC connector,
or its cable.
d.
Use a Phillips #2 screwdriver to secure the two bond screws into the wall-mount bracket. The bond
screws are accessible from the bottom access compartment. The bond screws provide an earthing
(grounding) bond between the AC Battery and the wall-mount bracket.
WARNING
: Always secure the bond screws to ensure earthing (grounding) bond and that the
AC Battery is firmly attached to the wall-mount bracket.
e.
Plug the DC connector into DC socket. Listen for a click as the connectors engage.
Bottom view (access panel removed)
