11
Chapter 2 INSTALLATION
2-3 System Memories
This motherboard supports two 72-pin Single Inline Memory
Modules (SIMM) of 4MB, 8MB, 16MB, 32MB, and/or 64MB to
form a memory size between 8MB to 256MB. The DRAM can be
either 60ns or 70ns Fast Page Mode (FPM, Asymmetric or
Symmetric), Extended Data Output (EDO). SIMMs must be installed
in pairs so that each bank contains two of the same size and same
model memory modules.
This motherboard also supports two Dual Inline Memory
Modules (DIMM’S), The Dual Inline Memory Module (DIMM) must
be 3.3 Volt Unbuffered Synchronous DRAM (SDRAM) or Exteded
Data Output (EDO) DRAM of either 16, 32, 64, or 128MB to form a
memory size between 16MB to 256MB.
Note :
1. Install memory in any combination as next page :
2. Do not mixed use SIMM and DIMM
EP-PI11 User’s Manual