Enovation Controls Murphy PowerView PV485 Operation Manual Download Page 20

Page: 20 / 53

2021-

0306

2507

00-02-1207

Engine Manufacturer

This selection

allows the operator

to select the

engine manufacturer

of the

ngine

which currently

includ

es:

Caterpillar, Cummins, Deutz, JCB", Volvo, Perkins,

HATZ, Yanmar, Kubota, Doosan, Kohler, John Deere, FPT, Isuzu, PSI, Ford, GM and Scania.

By default, t

he engine

manufacturer is set

to Other. When

engine

manufacturer is selected the

display

software

will automatically adjust

the required

settings to ensure the engine

is controlled per the manufacturer

’s requirements.

Engine Model

This optional selection

allows the user

to select the model of the

ngine.

As with

engine manufacturer, unique settings are applied once a different engine model is

selected

to ensure control

settings

meet

the

manufacturer’s requirements.

Engine Start Method

This selection

allows the operator

to select the method that will start the

ngine:

Engine Start Method

Description

CAN Start

If selected, the engine can be started using a CAN message. The
specific CAN messages need to be programmed.

Digital Output Start

This method uses digital output to control an external relay for
crank.

Key StartDisabled

Crank is controlled by an external device such as a key.

Formatted:

Centered

Formatted Table

Formatted:

Font: Bold

Formatted:

Font: Bold

Summary of Contents for Murphy PowerView PV485






















































Search results

Summary of Contents for Murphy PowerView PV485

Reviews:

Related manuals for Murphy PowerView PV485

Brands by name

Popular brands

Enovation Controls Murphy PowerView PV485, Operation Manual

Search results

Summary of Contents for Murphy PowerView PV485

Reviews:

Related manuals for Murphy PowerView PV485

Brands by name

Popular brands