TOC1207NUEN_0512
4/4
6.1 New or existing installation
• If the receiver functions at a shorter distance relative to the sensor, it is subject to interference or
used outside the transmission range.
• Search the system environment for changes that could cause the interference (for example
movement of metallic cabinets, furniture or partitions).
• Use the sensor or receiver in a more suitable location.
• Clear the receiver and perform a new learn process.
6.2 Limitation of the range of the radio signals
• Transmitter/receiver used close to metallic objects or close to materials containing metallic
elements. Observe a distance of at least 10 cm.
• Humidity in the materials.
• Devices emitting high frequency signals such as audio and video systems, computers, electronic
ballasts or fluorescent tubes. Observe a distance of at least 0.5 m.
6.3 Contacts
E-mail:............................ [email protected]
These products can be marketed and distributed in the countries of the European Union,
Switzerland, Iceland and Norway.
TRI
0
2
SYS
hereby declares that the sensors 10020041
.xx
conform to the base requirements and other applicable requirements of the directive 1999/5/CE
referred to as R&TTE.
6. Troubleshooting
ion and initial use
7. Declaration of conformity
TOC1207NUEN_0512
1/4
1.1 Use
The sensors
0
2
LINE
10020041.xx are designed to measure ambient temperature and relative
humidity then transmit it wirelessly to a matched receiver. As the sensor is supplied by a solar cell, it
is maintenance-free. As soon as the change in temperature exceeds +/-0.5°C, or the humidity
changes by +/-2%, a signal is sent immediately. Moreover the signal is retransmitted every 15
minutes.
Note:
Read the operating manual carefully before initial use.
1.2 Guarantee terms
This operating manual is an integral part of the device and our guarantee terms. It must always be
delivered to the user. We reserve the right to modify the technical design of these devices without
warning.
TRI
0
2
SYS
products are manufactured and their quality checked by making use of the
latest technologies and taking into account the applicable national and international directives. If
nevertheless a fault arises,
TRI
0
2
SYS
undertakes to remedy the default as follows, without
prejudicing the rights of the end customer that arise from the sales contract with his reseller:
If the event of exercising of a legitimate and regular right,
TRI
0
2
SYS
, may at its sole discretion,
rectify the device fault or supply a fault-free device. Any claim beyond this and all claims for
consequential damages are excluded.
A legitimate fault exists if the device cannot be used at the time of delivery to the end customer
because of a design or manufacturing defect or if its practical use is severely limited. The guarantee
is void in cases of natural wear and tear, incorrect use, incorrect connection, where the device has
been repaired or external influence. The period of guarantee is 24 months (from the date of
invoicing). French law applies to the regulation of guarantee rights.
1.3 Recycling of the device
To recycle the device, conform to the legislation and standards in force in the country of use.
Installation and operating manual
Combined 0-40°C temperature and relative
humidity sensor
EN
1. General
TRI
0
2
SYS
sarl
– 8 grande rue le village
21160 FLAVIGNEROT
