Quick Start Guide
Navigan™ Wireless Commissioner NWC 300 / NWC 300U
© 2016 EnOcean | www.enocean.com
Navigan | v1.0 | Aug 2017 | Page 5/ 9
5
STEPS TO COMMISSION AN LED CONTROLLER
Step 1: Locate and identify the controller you would like to commission using the “Locate”
function.
Hint
You can Right click on these relays and Name them all at once. Right
Click and then “Rename”
Click
“Discover Controllers”
This bar hides controllers that are physically
further away, helpful for larger projects by
reducing visible devices.
Use the locate button to blink the connected
luminaire(s) associated with this ID. If the
device you are seeking is not in the list, click
“Find More Controllers”
Now that you see where it is, Type in a logical
name for the controller.
When you’ve located and named all the
devices in the room, you need to move them
to the workspace for configuration. Click on
the controller to highlight in a light blue. You
can select more than one by using CTRL-Click,
SHIFT-Click, or CTRL-A to select all.
Once the desired controllers are highlighted
click “Add Devices to Workspace”
