GS09 - PROXIMITY SWITCH USER MANUAL
WARNINGS
• While removing your Proximity Switch from your
GlassOuse or other devices, pay attention not to
damage the wire joining points both on the 3.5mm
jack connector and the Proximitry Switch module
parts.
• To change the battery, remove the tiny screws at
the bottom. Pay attention to the + and – pole
remarks of the battery box during installation.
• Keep Proximity Switch away from magnets.
7th Floor, Huarong Building, Qiaolian East, Bulong Road,
Longgang District, 518129, Shenzhen, Guangdong, China
P. 0086-755-8920-5835 F. 0086-755-8980-5835-812
[email protected] | www.glassouse.com | www.ennopro.com
PROXIMITY SWITCH
With an 8.63cm activation surface, Proximity Switch is highly
sensitive to detect different levels of distances from the
activation surface to perform your clicks. You can use any
part of your body to activate the switch via hovering over the
surface. GS09 Proximity Switch comes with a mono 3.5mm
jack connector plug and it is compatible with any kind of
adapted devices besides GlassOuse V1.2 and higher.
Proximity Switch works with 3x AAA dry or Ni-MH batteries
and its smart battery system turns the device off in one hour
if it is not used. Auditory and visual feedback can be
selected according to the user’s needs easily or can be
turned off if desired.
