Owner’s manual
SF-xxx-x series bio-ethanol burner
Page 16 / 49
Version 1.0
3.2.
Using the buttons
The buttons on the burner can be used to operate the burner.
3.2.1.
Turning the burner on
To turn on the burner, push the on/off button twice (you will hear a beep
each time you press a button).
Note: it may take up to 5 minutes for the burner to warm up. During this
warm-up time, no yellow flames will be visible.
3.2.2.
Adjusting flame level
Adjust the flame level by pressing the Up or Down buttons (there are 5
levels). It may take a minute before the difference in level is visible.
3.2.3.
Turn the burner off
Push the on/off button to turn the burner off. A beep will sound and the
power button will flash green. This indicates the cooling down period has
started, which as a safety measure will last approximately 10 minutes,
during which time you cannot start the burner again.
Remote
control sensor
On/off
Up
Down
