Engl RACKHEAD 1060, Manual

Page: 7 / 25

Channel A (tube-driven)
Input A ¼” (6.35 mm) input jack for Channel A
-12dB (switch) Attenuates input gain for hot pickups & active basses
Bright (switch) Adds high-frequency boost to the input signal
Gain (knob) Adjusts input sensitivity.
Clip (red LED) The Clip LED may flash now and then, but not light up constantly while playing.
Drive (knob) Adjusts the mix of regular and boosted (Drive) signals
Drive (switch) Activates an additional power amp
Equalizer Four-band voicing section (Bass, Lo Mid, Hi Mid, Treble) with a Presence knob
Bass Boost (switch) Boosts low frequencies
Ultra Bright (switch) Boosts high frequencies
Volume (knob) Adjusts Channel A’s volume
Preamp A (blue LED) Lights up to indicate Channel A is on
Page 7 / 25