Rear Panel
Hands-Free Remote Control
The amp may be controlled remotely using a
Z-17 pedal or one, two or three footswitchs such as the
Z-4.
S.A.C.Port (
Z-17 Footswitch)
The switches on the Z-17 pedal operate specific functions. These
assignments depend on which amp input is in use (Input A or B)
and
whether or not SWAP is depressed.
Function 1 (Mute)
and
function 2 (Swap)
are always assigned to the
same switch because they are used for both channels.
The assignments of
functions 3
to
6
vary according to the currently active channel (as indicated by the blue
LED on the amp).
Page 10 / 25
Summary of Contents for RACKHEAD 1060
Page 3: ...Page3 25...
Page 6: ...Front Panel Page6 25...
Page 20: ...Figure 5 Block diagram Page20 25...
Page 25: ...Notes Page25 25...
