EnGenius EWS850AP, User Manual

Page: 40 / 81

40
Wireless MAC Filtering
Wireless MAC Filtering is used to allow or deny network
access to wireless clients (computers, tablet PCs, NAS,
smartphones, etc.) according to their MAC addresses. You
can manually add a MAC address to restrict permission to
access the AP. The default setting is: Disable Wireless
MAC Filter
.
Note: Only applicable in Access Point and WDS AP
modes.
ACL Mode: Determines whether network access is granted
or denied to clients whose MAC addresses appear in the
MAC address table on this page. There are three optoin:
Disabled / Allow MAC in the list / Deny MAC in the list.
MAC Address:
Enter the MAC address of the wireless client.
Add:
Click
Add
to add the MAC address to the MAC address
table.