EnGenius EWS850AP, User Manual

Page: 35 / 81

35
Transmit Power: Set the power output of the wireless
signal.
Bit Rate: 2.4GHz and 5GHz can be controled by BAR via
scroll from 6Mbps to 54Mbps.
Client Limits: If you set the limitation of client numbers ,
the maximum assocaited client devices will be restricted at
this number. The client limits is default in127.
AP Detection: AP Detection can select the best channel to
use by scanning nearby areas for Access Points.
11ax mode: This mode is optionnal for 2.4GHz, you can
select Enable or Disale base on the application scenario.
Distance: Specifies the distance between Access Points
and client devices. The proper setting for this parameter
may assist Access Points to avoid the improper operation
when transmitting data under a filed application.