EnGenius EWS1025CAM User Manual Download

Page: 85 / 144

Email Alert

The Access Point will send email alerts when configurations have been changed.

Status:

Check

Enable

to enable Email Alert feature.

From:

Enter the address to show as the sender of the email.

To:

Enter the address to show as the receiver of the email.

Subject:

Enter the subject to show as the subject of the email.

Email Account

Username/Password:

Enter the username and password required to connect to the SMTP server.

SMTP Server/Port:

Enter the IP address/domain name and port of the SMTP server. The default port of SMTP Server is port 25.

Security Mode

: Select the mode of security for the Email alert. The options are None, SSL/TLS and STARTTLS.

Send Test Mail:

Click

Send Test Mail

button to test the Email Alert setup.

Summary of Contents for EWS1025CAM

















































































































































Search results

Summary of Contents for EWS1025CAM

Reviews:

Related manuals for EWS1025CAM

Brands by name

Popular brands

EnGenius EWS1025CAM, User Manual

Search results

Summary of Contents for EWS1025CAM

Reviews:

Related manuals for EWS1025CAM

Brands by name

Popular brands