EnGenius EWS1025CAM User Manual Download

Page: 61 / 144

Guest Network

The Guest Network function allows administrators to grant Internet connectivity to visitors or guests while keeping other
networked devices (computers and hard drives) and sensitive personal or company information private and secure.

Enable SSID:

Select to Enable or Disable SSID broadcasting.

SSID:

Specify the SSID for the current profile. This is the name visible on the network to wireless clients.

Security:

You can use None or WPA-PSK / WPA2-PSK security for this guest network.

Hidden SSID:

Check this option to hide the SSID from broadcasting to discourage wireless users from connecting to a particular

SSID.

Client Isolation:

Check this option to prevent wireless clients associated with your access point to communicate with other

wireless devices connected to the AP.

Summary of Contents for EWS1025CAM

















































































































































Search results

Summary of Contents for EWS1025CAM

Reviews:

Related manuals for EWS1025CAM

Brands by name

Popular brands

EnGenius EWS1025CAM, User Manual

Search results

Summary of Contents for EWS1025CAM

Reviews:

Related manuals for EWS1025CAM

Brands by name

Popular brands