EnGenius EAP2200, User Manual

Page: 7 / 84

Introduction
The AP is a great performance, the state-of-the-art 802.11ac and MU-MIMO technology brings revolutionary connecting speed and bandwidth for diversity of
multimedia applications. EAP2200 equips with two powerful RF interfaces that support up to 867 + 867 Mbps in 5GHz frequency band and 400 Mbps in 2.4GHz
frequency band (with 2ss/VHT40 clients). It can be configuring as an: Access Point, Repeater, or WDS (AP, Station & Bridge). Its high-powered, long-range
characteristics make it a cost-effective alternative to ordinary Access Points that don’t have the range and reach to connect to a growing number of wireless users who
wish to connect to a business network. The AP supports the 2.4GHz frequency band under 802.11 b/g/n modes while at the same time providing 5GHz band under
802.11 ac/a/n modes for communicating to and from 5GHz capable computers, tablets or smart phones or transferring files. Several APs can be deployed in a
campus setting using the 5GHz band as a backhaul to provide multiple 2.4GHz wireless cells for computers or mobile devices in common indoor areas.
The AP is easy to install in virtually any location with PoE (Power over Ethernet). The AP enables network administrators to control its transmit power and feature settings
for selecting narrow bandwidth and traffic shaping. The AP also supports wireless encryption including Wi-Fi Protected Access (WPA-PSK/WPA2-PSK) Encryption, and
IEEE 802.1x with RADIUS.
EnGenius three dedicated bands Wireless Management Access Point solution is designed for deploying on the versatile indoor application. To meet today’s
requirement on varied net-working environment, EnGenius would like to provide the solution as flexible, robust and effective as the organization they desire. With one
2.4GHz band and two 5GHz bands to work with, the EAP2200 assigns each device to the band where it can connect at its maximum possible speed.