EnGenius DuraFon User Manual Download Page 13

Page: 13 / 77

~13~

Handset Features

Basic Handset Features

1. 4-Line LCD (Liquid Crystal Display)

a. The LCD display has LED (Light Emitting Diode) for backlighting.

b. The 1

line of LCD consists of icons .

c. Icons explanation from left to right

(1)

RSSI l evel (Receive Signal Strength Indicator)

Duri ng a call, the number of bars is proportional to
the ra dio s ignal strength received.

(5)

DuraFon-SIP

REDIAL

MENU

(1)(2)

(3) (4)

(6)

(2)

Link mode
(2.1) Call in-progress (ON/OFF-Hook)
Indicates if the phone line is in the OFF-Hook s tatus.

(2.2) Intercom in-progress
Indicates if Intercom mode is a ctive.
Indicates the Handset ID that is s ending the intercom call.

(3)

Line, Sound and Indication
(3.1) Line Indicator
Indicates when using line 1 or the incoming ca ll from FXO line.

(3.2) SIP Indicator
Indicates when using SIP or the incoming ca ll from SIP.

(3.3) Enable ringer

(3.4) Disable ringer

(3.5) Ringer and vibrate mode

(3.6) Vibrate mode

(3.7) Message waiting indicator

(4)

Disable PA and indicate speaker phone
(4.1) Indicates i f the incoming broadcast is disabled.

(4.2) Speaker indicator

Indicates if the speakerphone i s active.

(5)
11

Two-Digit Handset ID
Di s plays the 2-digit Handset ID of owner.

(6)

Battery Strength
Number of bars i s proportional to the amount of battery ti me remaining.

d. The 2

and 3

lines of the LCD, maximum 16-characters each, display

status, message, menu selections, or user-editable alphanumerical
characters.

Summary of Contents for DuraFon














































































Search results

Summary of Contents for DuraFon

Reviews:

Related manuals for DuraFon

Brands by name

Popular brands

EnGenius DuraFon, User Manual

Search results

Summary of Contents for DuraFon

Reviews:

Related manuals for DuraFon

Brands by name

Popular brands