ENGELS ENGELCONTROL STBW 225 Operating Instructions Download Page 1

Operating Instructions STBW 225                                                                                 

May 2022 

Seite 1 

             

 

 

 

    

 

 

 

 

 

 

 

          

    

                                                      

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ENGELCONTROL

®

 

Safety Temperature Limiter 

with Temperature Monitor

 

 

Type STBW 225 / RTKSA-011.210

 

 

for Electric Air Heaters 

in Air Conditioning and Ventilation 

 

 

 

Notes on Operating Instructions

 

 

Please read these operating instructions carefully and observe the relevant country-specific standards, safety 
regulations and accident prevention regulations. 
The assembly instructions must be kept available during the lifetime of the device. 
Passing on and duplicating this document, exploiting and communicating its contents are prohibited, unless 
expressly permitted. All rights reserved in the event of patent, utility model or design registration. 
The following warnings are used in this manual: 
 

 

Immediate danger from electrical voltage 
Failure to do so can result in serious injury, death, or property damage 
have as a consequence. 

 

 

Possible Danger  
Non-observance can result in serious injuries or damage to property. 

 
1. Safety Instructions  

 

 

Assembly, electrical installation, commissioning and maintenance of the temperature limiter 
may only be carried out by a qualified electrician. The instructions in this manual must be 
understood, observed and followed. He is responsible for ensuring that the device is correctly 
connected in accordance with the electrical connection diagrams.  
The device is maintenance-free. 
 

Summary of Contents for ENGELCONTROL STBW 225

Page 1: ...ibited unless expressly permitted All rights reserved in the event of patent utility model or design registration The following warnings are used in this manual Immediate danger from electrical voltage Failure to do so can result in serious injury death or property damage have as a consequence Possible Danger Non observance can result in serious injuries or damage to property 1 Safety Instructions...

Page 2: ... is fastened with the screws in the fastening set screw and plate by clamping them onto the protective coil see Fig 1 Intended use also includes the following points The instructions in this manual must be observed and followed The technical limit values see chapter 6 Technical data must be observed The probe is to be used exclusively for measuring air The devices are not suitable and intended for...

Page 3: ...must be observed 5 1 Installation The thermostats can be installed in the installation position according to DIN 16257 NL 0 NL 90 The capillary tube must not be shortened or kinked 6 Electrical Connection The electrical connection may only be made in a voltage free state The electrical conductors are connected in accordance with the circuit diagram The stripping length of 11 13 mm must be observed...

Page 4: ...y Cu Protective Coil length 200 mm Material Protective Coil steel nickel plated complete type designation STBW 225 RTKSA 011 210 Switching off can occur at ambient temperatures below 263 K 10 Maintenance and Repair Before commissioning and at sufficient intervals the measuring system must be checked for functionality The intended effect must also be checked here When cleaning the outside make sure...

Reviews: