Integrated Synchronous Servo Drives
HBI 22xx / HBI 26xx / HBI 32xx / HBI 37xx
Operating Manual Rev. 1.6
www.engelantriebe.de
page 44
11
"DSerV" PC service software
The DSerV service software provides a simple and clearly laid out configuration of the drives. Important operating
statuses, such as speed, current, enable, etc. can be seen at a quick glance. Scalings, current limits and operating modes
are adjustable through menus. Device settings can be saved on the hard disk of the PC. The program language is selectable:
German / English / French.
11.1 System requirements
For the installation and operation of the DSerV service software, the following requirements apply:
IBM compatible PC (laptop), Pentium or higher, with at least 16MB RAM
At least 10MB free hard disk space
Microsoft WINDOWS
95, 98, NT 4.0, 2000, XP
CD-ROM drive
Serial interface COM1...COM99:
On-board or USB-to-RS232 converter, supported baud rate at least 115.2 kBaud
Serial connection cable
(see chapter 6.2 Installation diagram
11.2 Installation and start-up of the program
Note
:
Read the licence agreement on the provided data carrier of the software before installation.
With the installation of the DSerV service software, you agree to the conditions of the license
agreement.
Installation
The installation of DSerV is limited to the copying of the program files to a working directory:
1.
Start WINDOWS
.
2.
Insert the CD-ROM with DSerV service software in an appropriate drive
.
3.
Start WINDOWS
Explorer and display the CD-ROM contents (main directory).
Alternative 1 (recommended):
4.
Start the file DSerV.exe directly from the CD-ROM. An installation menu opens up.
Comment: The installation menu only opens if DSerV.exe is started from a removable data carrier,
such as CD-ROM.
5.
Follow the further instructions in the installation menu.
Alternative 2:
4.
Manually copy the entire directory tree from the CD-ROM to a previously created working
directory on the internal hard disk of the PC.
(This process can also be applied if the software was supplied in electronic form and not on CD-ROM.)
