ENFORCER Power Supply/Charger with Enclosure
4
SECO-LARM U.S.A., Inc.
SECO-LARM
®
U.S.A., Inc.
16842 Millikan Avenue, Irvine, CA 92606
Website: www.seco-larm.com
Phone: (949) 261-2999 | (800) 662-0800 Email: [email protected]
NOTICE:
The SECO-LARM policy is one of continual development and improvement. For that reason, SECO-LARM
reserves the right to change specifications without notice. SECO-LARM is also not responsible for misprints. All trademarks
are the property of SECO-LARM U.S.A., Inc. or their respective owners. Copyright © 2018 SECO-LARM U.S.A., Inc. All
rights reserved.
®
PITSW1
763-187%
MI_ST-2406-3AEQ_180620.docx
WARRANTY:
This SECO-LARM product is warranted against defects in material and workmanship while used in normal
service for 1 (one) year from the date of sale to the original customer. SECO-LARM’s obligation is limited to the repair or
replacement of any defective part if the unit is returned, transportation prepaid, to SECO-LARM. This Warranty is void if
damage is caused by or attributed to acts of God, physical or electrical misuse or abuse, neglect, repair or alteration,
improper or abnormal usage, or faulty installation, or if for any other reason SECO-LARM determines that such equipment
is not operating properly as a result of causes other than defects in material and workmanship. The sole obligation of
SECO-LARM and the purchaser’s exclusive remedy, shall be limited to the replacement or repair only, at SECO-LARM’s
option. In no event shall SECO-LARM be liable for any special, collateral, incidental, or consequential personal or property
damage of any kind to the purchaser or anyone else.
Also Available from
SECO-LARM
®
:
12VDC High-Amp
Switching CCTV
Power Supplies
Relay Boards
Low Battery Cutoff
Power
Supply/Charger
Boards
PC-U1810-PULQ shown
SR-2212-C5AQ shown
ST-BD01Q
ST-2406-5AQ shown
12VDC Plug-In
AC Adapters
Power Converters
Plug-and-Play
Backup Batteries
Open-Frame
Transformers
ST-UV12-S1.0Q shown
ST-LA130-TTQ shown
SB-L10V1-20Q shown
ST-UVDA-W100Q shown
No DC output
•
Check whether the AC input voltage or backup battery voltage is
normal
Low DC voltage output
•
Check whether the output voltage setting is correct
•
Check whether the AC input wattage is correct (see chart, pg. 3)
•
If the battery is supplying power, check whether the battery
voltage is normal
•
Check whether the power supply board is overloaded
No backup battery power
•
Check whether the battery voltage is normal or already discharged
•
Check whether the master fuse has burned out
Troubleshooting:
