ENFORCER Power Supply/Charger with Enclosure
2
SECO-LARM U.S.A., Inc.
Parts List:
1x Power supply/charger unit
3x Wire leads for backup battery
1x Flange nut for wire relief clamp
1x Wire relief clamp
2x Screw-on wire nuts
1x Large grommet
1x Small grommet
1x Manual
Introduction:
DC Voltage
6,12,24
Operating voltage
12~24 VAC/VDC for 6VDC, 18~24 VAC/VDC for 12VDC, 24~28 VAC or 26~28 VDC for 24VDC
Status
LEDs
AC Input
Green
DC Output
Red/Blue (Blue indicates 24V)
Current (continuous)
2.5A
Current (peak)
3.0A
Current output (max. charge)
6V=100mA, 12V=220mA, 24V=450mA
Maximum AC input
See Transformer Selection in Table 3, pg. 3
Master fuse
5A
Low battery cutoff
When battery voltage is <20%
Operating temperature
-4°~149° F (-20°~65° C)
Dimensions
Board
2
7
/
8
"x2
7
/
8
"x1
3
/
8
" (73x73x35 mm)
Enclosure
10"x7
3
/
4
"x3
1
/
2
" (254x196x89 mm)
Specifications:
SECO-LARM’s ST-2406-3AEQ power supply/charger ensures that alarm systems and access control
systems have enough power to do their job. Protected by fused battery outputs, input polarity protection
diodes, and backup battery polarity reverse protection, this power supply/charger can be used to maximize
the security and efficiency of nearly any alarm or access control installation. Enclosure has space for up to 2
backup batteries (leads included for one optional backup battery).
Overview:
DC Output LED
(red/blue)
1 2
ON
AC
– DC
+
– BAT
+
Class-II
transformer
VAC input
Backup
battery
outputs
AC Input
LED
(green)
Master
fuse
Voltage selector
DIP switch
Output voltage
trimpot
Alarm or access
control panel
VDC output
1
2
O
N
AC
– DC
+
– BAT +
Mounting holes
Mounting holes
Wire relief clamp
mounting screw
Knockout
(top, bottom,
both sides
and back)
Ventilation holes
(both sides)
Notes:
1.
Other holes shown are for
transformer mounting
2.
Bottom side includes two security
lock holes
Power Supply/Charger
Enclosure (cover removed)
Front View
Side View
AC power
input hole
