Copyright ©2012 Enforcement Technology Group, Inc. (ETGI). All Rights Reserved. Information subject to change without notice. Bluetooth
®
is a registered trademark of Bluetooth SIG, Inc.
POST
OPERATIONS:
Please
follow
the
procedures
listed
below
after
Concealed
Communicator
™
operations
have
concluded:
1.
Power
off
the
Concealed
Communicator
™
Base
Unit
by
pressing
and
holding
down
the
unit's
"
POWER
"
button.
NOTE:
Release
the
"
POWER
"
button
when
the
unit's
LEDs turn
off
signaling
that
the
unit
has
been
successfully
powered
off.
2.
Disconnect
the
"
Low
Profile
Microphone
,"
"
Neck
Loop
Transmitter
"
and
"
Tone
Generator
Button
"
(if
connected)
components
from
the
Concealed
Communicator
™
Base
Unit
and
store.
3.
Instruct
Field
Operator
to
remove
the
"
Earpiece
Magnets
"
in
accordance
with
the
"
Earpiece
Magnet
Extraction
Procedures
&
Warnings
"
section
of
this
manual.
NOTE:
Once
the
"Earpiece
Magnets"
have
been
removed
and
cleaned/disinfected,
they
should
be
individually
stored
in
the
provided
plastic
shell
vials.
4.
Charged
the
Concealed
Communicator
™
Base
Unit's
battery
in
accordance
with
the
"
Concealed
Communicator
Base
Unit
Power
Information
&
Battery
Charging
Procedures
"
section
of
this
manual.
10
