1
•
15J0132B100
•
REMOTE SINUS
PC-based engineering tool for
SINUS S inverters
- Installation and connection -
Issued on 13/04/2021
Software Version 1.18
R.01
Enertronica Santerno S.p.A.
Via della Concia, 7
–
40023 Castel Guelfo (BO) Italy
Tel. +39 0542 489711
–
Fax +39 0542 489722
•
This manual is integrant and essential to the product. Carefully read the instructions contained
herein as they provide important hints for use and maintenance safety.
•
This device is to be used only for the purposes it has been designed to. Other uses should be
considered improper and dangerous. The manufacturer is not responsible for possible damages
caused by improper, erroneous and irrational uses.
•
Enertronica Santerno S.p.A. is responsible for the product in its original setting.
•
Any changes to the structure or operating cycle of the product must be performed or
authorized by Enertronica Santerno S.p.A.
•
Enertronica Santerno S.p.A. assumes no responsibility for the consequences resulting by the
use of non-original spare-parts.
•
Enertronica Santerno S.p.A. reserves the right to make any technical changes to this manual
and to the product without prior notice. If printing errors or similar are detected, the corrections
will be included in the new releases of the manual.
•
The information contained herein is the property of Enertronica Santerno S.p.A. and cannot be
reproduced. Enertronica Santerno S.p.A. enforces its rights on the drawings and catalogues
according to the law.
