User Manual of Truck iQ
TM
ENGLISH
1. Description
The Truck iQ™ is one of the latest “iQ” devices from EnerSys
®
.
The device consists of a display powered by the battery via the
truck cables. It reads in real time and wirelessly data from the
Wi-iQ3
®
, displaying alerts, alarms, State of Charge and other
useful parameters to optimise the operation of the battery.
2. Mechanical installation
2.1 Install the Truck iQ fixing bracket (supplied) on the most
suitable part of the truck dashboard. Note, the device
should be mounted in a position that will protect it from
collision with external obstructions.
2.2 The bracket can be assembled in various ways to allow a
multitude of mounting configurations (see Figure 1).
Figure 1: Bracket configurations
2.3 Connect the supply cable pins on the +VBAT and –VBAT
on the battery or on the truck side (see Figures 2 & 3).
Nominal battery voltage: 24 - 96V
Male plug with
fastening screw
Relay port
cable (optional
connection)
Figure 2: Supply cable
Figure 3: Power Pin on the supply cable
2.4 Plug the male connector into the right female socket
situated on the rear side of the Truck iQ (see Figure 4).
Female socket for supply cable
Figure 4: Rear of Truck iQ and socket for supply cable highlighted
2.5 Turn the “fastening screw” on the connector to lock the
supply cable to the Truck iQ.
2.6 Power the Truck iQ by connecting the traction battery to
the truck.
3. Handshake with Wi-iQ3
The Truck iQ can be paired with the Wi-iQ3 either manually or
automatically.
Manual procedure:
Setting -> I/O -> Pairing -> Disable Auto pairing.
Select the appropriate Wi-iQ3 device by clicking on the BLE
(Bluetooth) icon.
NB: The Wi-iQ3 device is normally equal to the battery name.
Figure 5: Setting and Pairing Screen
Auto Pairing:
Setting -> I/O -> Pairing -> Enable Auto pairing.
The device will pair automatically with the Wi-iQ3 connected
to the traction battery which is powering the Truck iQ.
