background image

Battery 

Installation Manual

Pubication No: US-DDM-IM-AA - June 2016

GENERAL SAFETY INSTRUCTIONS

Warnings in this manual appear in any of three ways:

Danger
The danger symbol is a lightning bolt mark, enclosed in a triangle. The danger symbol is 

used to indicate imminently hazardous situations, locations and conditions which, if not 

avoided, WILL result in death, serious injury and/or severe property damage.

Other warning symbols may appear along with the Danger and Caution symbols and are used to specify 

special hazards. These warnings describe particular areas where special care and/or procedures are required 

in order to prevent serious injury and possible death:

Electrical warnings
The electrical warning symbol is a lightning bolt mark enclosed in a triangle. The electrical 

warning symbol is used to indicate high voltage locations and conditions, which may 

cause serious injury or death if the proper precautions are not observed.

Harmful if swallowed, inhaled, or in contact with skin. Acid causes severe skin burns and eye damage. May 

damage fertility or the unborn child if ingested or inhaled. May cause harm to breast-fed children. May cause 

cancer if ingested or inhaled. Causes skin irritation, serious eye damage. Contact with internal components 

may cause irritation or severe burns. Causes damage to central nervous system, blood and kidneys through 

prolonged or repeated exposure if ingested or inhaled. Irritating to eyes, respiratory system, and skin. May 

form explosive air/gas mixture during charging. Extremely flammable gas (hydrogen). Explosive, fire, blast or 

projection hazard.

Obtain special instructions before use. Do not handle until all safety precautions have been read and 

understood. Wash thoroughly after handling. Do not eat drink or smoke when using this product. Avoid contact 

during pregnancy/while nursing. Wear protective gloves/protective clothing, eye protection/face protection. 

Use only outdoors or in a well-ventilated area. Avoid contact with internal acid. Do not breathe 

dust/fume/gas/mist/vapors/spray. Keep away from heat/sparks/open flames/hot surfaces. No smoking.

IF SWALLOWED OR CONSUMED: rinse mouth. Do NOT induce vomiting. Call a poison center/doctor if you feel 

unwell. IF ON CLOTHING OR SKIN (or hair): Remove/Take off immediately all contaminated clothing and wash 

it before reuse. Rinse skin with water/shower. IF INHALED: Remove person to fresh air and keep comfortable 

for breathing. Immediately call a POISON CENTER or doctor/physician. IF IN EYES: Rinse cautiously with water 

for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If exposed/concerned, 

or if you feel unwell seek medical attention/advice. 

Store locked up, in a well-ventilated area, in accordance with local and national regulation. 

Dispose of contents/container in accordance with local and national regulation. Keep out of reach of children.

EnerSys, 2366 Bernville Road, Reading, PA 19605, USA - Tel: +1 610-208-1991

Contains: 

Lead, Sulfuric Acid (Electrolyte), Lead Compounds.

DANGER

2201-8677

Harmful if swallowed, inhaled, or in contact with skin. Acid causes severe skin burns and eye damage. May 

damage fertility or the unborn child if ingested or inhaled. May cause harm to breast-fed children. May cause 

cancer if ingested or inhaled. Causes skin irritation, serious eye damage. Contact with internal components 

may cause irritation or severe burns. Causes damage to central nervous system, blood and kidneys through 

prolonged or repeated exposure if ingested or inhaled. Irritating to eyes, respiratory system, and skin. May 

form explosive air/gas mixture during charging. Extremely flammable gas (hydrogen). Explosive, fire, blast or 

projection hazard.

Obtain special instructions before use. Do not handle until all safety precautions have been read and 

understood. Wash thoroughly after handling. Do not eat drink or smoke when using this product. Avoid contact 

during pregnancy/while nursing. Wear protective gloves/protective clothing, eye protection/face protection. 

Use only outdoors or in a well-ventilated area. Avoid contact with internal acid. Do not breathe 

dust/fume/gas/mist/vapors/spray. Keep away from heat/sparks/open flames/hot surfaces. No smoking.

IF SWALLOWED OR CONSUMED: rinse mouth. Do NOT induce vomiting. Call a poison center/doctor if you feel 

unwell. IF ON CLOTHING OR SKIN (or hair): Remove/Take off immediately all contaminated clothing and wash 

it before reuse. Rinse skin with water/shower. IF INHALED: Remove person to fresh air and keep comfortable 

for breathing. Immediately call a POISON CENTER or doctor/physician. IF IN EYES: Rinse cautiously with water 

for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If exposed/concerned, 

or if you feel unwell seek medical attention/advice. 

Store locked up, in a well-ventilated area, in accordance with local and national regulation. 

Dispose of contents/container in accordance with local and national regulation. Keep out of reach of children.

EnerSys, 2366 Bernville Road, Reading, PA 19605, USA - Tel: +1 610-208-1991

Contains: 

Lead, Sulfuric Acid (Electrolyte), Lead Compounds.

DANGER

2201-8677

Harmful if swallowed, inhaled, or in contact with skin. Acid causes severe skin burns and eye damage. May 

damage fertility or the unborn child if ingested or inhaled. May cause harm to breast-fed children. May cause 

cancer if ingested or inhaled. Causes skin irritation, serious eye damage. Contact with internal components 

may cause irritation or severe burns. Causes damage to central nervous system, blood and kidneys through 

prolonged or repeated exposure if ingested or inhaled. Irritating to eyes, respiratory system, and skin. May 

form explosive air/gas mixture during charging. Extremely flammable gas (hydrogen). Explosive, fire, blast or 

projection hazard.

Obtain special instructions before use. Do not handle until all safety precautions have been read and 

understood. Wash thoroughly after handling. Do not eat drink or smoke when using this product. Avoid contact 

during pregnancy/while nursing. Wear protective gloves/protective clothing, eye protection/face protection. 

Use only outdoors or in a well-ventilated area. Avoid contact with internal acid. Do not breathe 

dust/fume/gas/mist/vapors/spray. Keep away from heat/sparks/open flames/hot surfaces. No smoking.

IF SWALLOWED OR CONSUMED: rinse mouth. Do NOT induce vomiting. Call a poison center/doctor if you feel 

unwell. IF ON CLOTHING OR SKIN (or hair): Remove/Take off immediately all contaminated clothing and wash 

it before reuse. Rinse skin with water/shower. IF INHALED: Remove person to fresh air and keep comfortable 

for breathing. Immediately call a POISON CENTER or doctor/physician. IF IN EYES: Rinse cautiously with water 

for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If exposed/concerned, 

or if you feel unwell seek medical attention/advice. 

Store locked up, in a well-ventilated area, in accordance with local and national regulation. 

Dispose of contents/container in accordance with local and national regulation. Keep out of reach of children.

EnerSys, 2366 Bernville Road, Reading, PA 19605, USA - Tel: +1 610-208-1991

Contains: 

Lead, Sulfuric Acid (Electrolyte), Lead Compounds.

DANGER

2201-8677

Harmful if swallowed, inhaled, or in contact with skin. Acid causes severe skin burns and eye damage. May 

damage fertility or the unborn child if ingested or inhaled. May cause harm to breast-fed children. May cause 

cancer if ingested or inhaled. Causes skin irritation, serious eye damage. Contact with internal components 

may cause irritation or severe burns. Causes damage to central nervous system, blood and kidneys through 

prolonged or repeated exposure if ingested or inhaled. Irritating to eyes, respiratory system, and skin. May 

form explosive air/gas mixture during charging. Extremely flammable gas (hydrogen). Explosive, fire, blast or 

projection hazard.

Obtain special instructions before use. Do not handle until all safety precautions have been read and 

understood. Wash thoroughly after handling. Do not eat drink or smoke when using this product. Avoid contact 

during pregnancy/while nursing. Wear protective gloves/protective clothing, eye protection/face protection. 

Use only outdoors or in a well-ventilated area. Avoid contact with internal acid. Do not breathe 

dust/fume/gas/mist/vapors/spray. Keep away from heat/sparks/open flames/hot surfaces. No smoking.

IF SWALLOWED OR CONSUMED: rinse mouth. Do NOT induce vomiting. Call a poison center/doctor if you feel 

unwell. IF ON CLOTHING OR SKIN (or hair): Remove/Take off immediately all contaminated clothing and wash 

it before reuse. Rinse skin with water/shower. IF INHALED: Remove person to fresh air and keep comfortable 

for breathing. Immediately call a POISON CENTER or doctor/physician. IF IN EYES: Rinse cautiously with water 

for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If exposed/concerned, 

or if you feel unwell seek medical attention/advice. 

Store locked up, in a well-ventilated area, in accordance with local and national regulation. 

Dispose of contents/container in accordance with local and national regulation. Keep out of reach of children.

EnerSys, 2366 Bernville Road, Reading, PA 19605, USA - Tel: +1 610-208-1991

Contains: 

Lead, Sulfuric Acid (Electrolyte), Lead Compounds.

DANGER

2201-8677

Warning
The warning symbol is an exclamation mark enclosed in a triangle. The warning symbol 

is used to indicate potentially hazardous situations and conditions, which, if not avoided 

COULD result in serious injury or death. Severe property damage COULD also occur.

Caution
The caution symbol is an exclamation mark enclosed in a triangle. The caution symbol is 

used to indicate potentially hazardous situations and conditions, which, if not avoided may 

result in injury. Equipment damage may also occur.

Explosion warnings
The explosion warning symbol is an explosion mark enclosed in a triangle. The explosion 

warning symbol is used to indicate locations and conditions where molten or exploding 

parts may cause serious injury or death if the proper precautions are not observed.

1

Harmful if swallowed, inhaled, or in contact with skin. Acid causes severe skin burns and eye damage. May 

damage fertility or the unborn child if ingested or inhaled. May cause harm to breast-fed children. May cause 

cancer if ingested or inhaled. Causes skin irritation, serious eye damage. Contact with internal components 

may cause irritation or severe burns. Causes damage to central nervous system, blood and kidneys through 

prolonged or repeated exposure if ingested or inhaled. Irritating to eyes, respiratory system, and skin. May 

form explosive air/gas mixture during charging. Extremely flammable gas (hydrogen). Explosive, fire, blast or 

projection hazard.

Obtain special instructions before use. Do not handle until all safety precautions have been read and 

understood. Wash thoroughly after handling. Do not eat drink or smoke when using this product. Avoid contact 

during pregnancy/while nursing. Wear protective gloves/protective clothing, eye protection/face protection. 

Use only outdoors or in a well-ventilated area. Avoid contact with internal acid. Do not breathe 

dust/fume/gas/mist/vapors/spray. Keep away from heat/sparks/open flames/hot surfaces. No smoking.

IF SWALLOWED OR CONSUMED: rinse mouth. Do NOT induce vomiting. Call a poison center/doctor if you feel 

unwell. IF ON CLOTHING OR SKIN (or hair): Remove/Take off immediately all contaminated clothing and wash 

it before reuse. Rinse skin with water/shower. IF INHALED: Remove person to fresh air and keep comfortable 

for breathing. Immediately call a POISON CENTER or doctor/physician. IF IN EYES: Rinse cautiously with water 

for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If exposed/concerned, 

or if you feel unwell seek medical attention/advice. 

Store locked up, in a well-ventilated area, in accordance with local and national regulation. 

Dispose of contents/container in accordance with local and national regulation. Keep out of reach of children.

EnerSys, 2366 Bernville Road, Reading, PA 19605, USA - Tel: +1 610-208-1991

Contains: 

Lead, Sulfuric Acid (Electrolyte), Lead Compounds.

DANGER

2201-8677

Summary of Contents for PowerSafe DDm 100-21

























Reviews: