EnerSys Alpha FXM HP 1100, Technical Manual

Page: 47 / 150

0170022-J0 Rev A Page 35
The upper-right area of the dashboard is the System Status tile. This tile displays the key values of a
system such as float voltage, battery voltage and system mode. The System Status tile has 24 user
configurable fields and can display up to six fields at a time. Pressing the Dashboard Paging button on
the left can rotate six fields at a time. To configure the dashboard fields, refer to Changing the Dash -
board Values section.
Pressing the System Status tile takes you to the System Shortcuts page.
Below the Alarm and System Status data tiles there are five buttons providing access to the rest of the
controller’s functionality.
NOTE
:
The FXM HP does not have an internal speaker.
Maintenance : Provides easy access to frequently-needed maintenance tasks including the Alarm
Cut-Off. Pressing the Maintenance button takes you to the Maintenance screen. The first page contains
general shortcuts, like Alarm Cut-Off , Forget All in Comms Lost and Replace ADIO . Each system
defined is also listed on the main page. Pressing a system button provides access to a page of
system-related maintenance shortcuts.
Figure 10: Maintenance Page
Figure 11: System Maintenance Page
Information : Provides contact information for technical support, as well as general information about
the controller such as the serial number, software version, and Operating System (OS) version.
Menu : Provides access to the controller menu, which follows almost the same menu structure as the
web interface.
Shortcuts : Provides quick access to several key functions that are used often, such as the Ethernet
settings. The Shortcuts menu also provides access to functions ONLY supported via the LCD such as:
• USB file browser