4.0 Web Interface, continued
46
704-939-B10-001 Rev. A5 (06/2019)
The tables on the right of the Spectrum page detail the X-Axis (Frequency), the Y-Axis (Amplitude), and the settings for
the Spectrum display.
Fig. 4-26, Spectrum Tables
Table 4-4, Spectrum Table Details
Spectrum Tool Features
Feature
Function
Frequency (X-Axis)
Center Frequency (MHz)
The frequency in the center of the display.
Span (MHz)
The range of frequencies in the display.
Start Frequency (MHz)
The frequency at the left end of the display.
Stop Frequency (MHz)
The frequency at the right end of the display.
Resolution Bandwidth (MHz)
The frequency range represented by each point on the spectral display.
Amplitude (Y-Axis)
Maximum (dBmV)
The highest power level shown on the display.
Minimum (dBmV)
The lowest power level shown on the display.
Measurements
Peak (dBmV)
The highest power level shown on the display. The reported value is
dependent upon the Resolution Bandwidth.
Peak Position (MHz)
The approximate frequency with the highest power level on the display.
Marker 1 (MHz)
Enter a frequency in MHz to see its respective power level.
Power (dBmV)
The power level for the previously entered frequency.
Marker 2 (MHz)
Enter a frequency in Mhz to see its respective power level.
Power (dBmV)
The power level for the previously entered frequency.
▲Frequency (MHz)
The difference in frequency between the two markers.
▲Power (dBmV)
The difference in power between the two markers.
