3.0 Network Configuration, continued
15
704-939-B10-001 Rev. A5 (06/2019)
3.3.1 Setting Modem Community Strings - docsDevNmAccess Method (IPv4 Only)
Set the modem community strings with the DOCSIS Configuration File by including the following SNMP parameters.
Table 3-1, Modem Community String Parameters - docsDevNmAccess Method
Modem Community String Parameters docsDevNmAccess Method
MIB Parameter
Object ID
Description
Value
docsDevNmAccessIp
1.3.6.1.2.1.69.1.2.1.2.x The IP address (or subnet) of
the NMS
e.g. 10.20.30.0
docsDevNmAccessIpMask
1.3.6.1.2.1.69.1.2.1.3.x The IP subnet mask of the NMS e.g. 255.255.255.0
docsDevNmAccessCommunity 1.3.6.1.2.1.69.1.2.1.4.x The community string matched
to this IP address net mask entry
alphanumeric string
docsDevNmAccessControl
1.3.6.1.2.1.69.1.2.1.5.x The level of access granted
1-3
None, Read Only, Read /
Write
docsDevNmAccessInterfaces
1.3.6.1.2.1.69.1.2.1.6.x Specifies the set of interfaces
from which requests from this
NMS will be accepted
0x40 : Cable interface
(typical)
0x80 : Ethernet interface
0xC0 or 0x00 : Both
interfaces
docsDevNmAccessStatus
1.3.6.1.2.1.69.1.2.1.7.x Controls and reflects the status
of rows in this table
4
Note: X denotes the index of the SNMP entry
