ENERpower XH18-LCD Display Manual Download Page 1

Page: 1 / 3

XH18-LCD Display Manual

Turn on the display for operating interface

Power button/front light button. Press to turn on the

display. Interface starts with

“

welcome

”

and then gets

into

operationinterface.Longpress toturnoff.Screenshutoffafter

showing

“

thank you

”

2. Press to switch between single mileage and total mileage.

3 . ODO is total mileage. TRIP is single mileage. Default is ODO.

4. Mileage figure

5. Mileage unit Km/h or Mile/h.(MPH)

6. Power assist Levels. Switch throttle for levels change from 1

to 4.

7. Speed indicator. Default unit is Km/h. Press

simultaneously for set-up to switch between Km and Mile.

and

Summary of Contents for XH18-LCD

Page 1: ...Longpress toturnoff Screenshutoffafter showing thank you 2 Press to switch between single mileage and total mileage 3 ODO is total mileage TRIP is single mileage Default is ODO 4 Mileage figure 5 Mile...

Page 2: ...ion Red color 11 Front light indicator Default is close Press on off front light to turn 12 Walk assisance 6km Default is close Turn throttle in wards for 2 seconds to turn on Walk assistance function...

Page 3: ...lt is to setupwheelsizes Switchthrottletoincreaseorreducesizefigure Press to set up Walk assistance function 6km h Switch throttle for on off choices Press interface to return operation 6km h off on u...