L4555_a
7
1.4 Ingress Protection Rating
WARNING
Failure to operate pump in accordance with the stated
ingress protection (IP) rating could result in death, electric
shock or serious personal injury. Damage to the pump
could also occur.
• The pump IP rating is IP54.
• The remote pendant IP rating (if equipped) is IP54.
• Outdoor use is permitted.
• Limited exposure to dust and moisture is permitted
in accordance with the stated IP rating. However,
the pump should be stored in a dry and protected
environment when not in use.
• Do not immerse the pump in water or other liquids.
• Do not allow water jets to contact the pump.
1.5 Labels
Various labels (decals, labels, symbols etc.) are affixed to
the pump. In some instances, these labels advise the user
of potentially hazardous situations. These labels typically
contain symbols instead of text. Understand the meaning
of each symbol before using the pump.
Read Instructions:
Read the product
instruction sheet before operating the
product and before performing any
inspection, adjustment, maintenance or
repair procedures.
Dangerous Voltages/Shock Hazard:
To
avoid the possibility of a dangerous and
potentially lethal electrical shock,
disconnect pump power cord from
electrical outlet before opening the pump
case.
Hot Surfaces Hazard:
Hot surfaces can
cause burns. Keep away from hot
surfaces.
Make sure all labels are legible and securely affixed to
the pump. If worn or missing, obtain replacements from
Enerpac.
2.0 COMPLIANCE
2.1 Compliance Statements
Enerpac ZE2 & ZW2-Series Electric Hydraulic Pumps
(all models)
Enerpac declares that the Enerpac ZE2 and ZW2-Series
electric hydraulic pumps have been tested and conform
to applicable standards and are approved to carry the CE,
TÜV and UKCA certification marks.
NOTICE
For all pumps, a copy of the product EU
Declaration of Conformity is enclosed with each shipment.
A copy of the UK Self Declaration of Conformity is also
enclosed
